Notice :
when the parcel arrived to your customs,please pay the tax and pick up the parcel
we are not responsible for any customs duty or import tax
if your place is remote ,then need to pay 45usd .
Product Description:
DNB-4 high-performance enameled wire paint stripping machine can completely remove the hard insulating paint, enamel paint, mL, lsonel, etc. on the wire surface without damaging the copper (aluminum) wire itself. Suitable for thinner wires, and can handle multiple enameled wires at the same time. Easy to operate, excellent effect.
Machine model: DNB一4
Applicable wire diameter: 0.06-0.65mm
Machine size: 310x205x210mm
Operating voltage: 220v/50Hz
Motor power: 120w
Speed: 6110r/min
Machine weight: 7kg
Optional wheel: tapered nylon fiber wheel
Belt size: 3x200mm
Paint stripping length: 2mm one unlimited
Installation and use:
Choose a suitable paint stripping wheel and install it on the machine. The tapered part of the paint stripping wheel is upward. Put an enameled wire in the middle of the two paint stripping wheels. Adjust the two paint stripping wheels until the enameled wire is gently clamped. Hold the coil part with your hand and start the switch to test the paint stripping effect. The pressure of the contact surface between the two paint stripping wheels can be adjusted to achieve the ideal paint stripping effect.
When working, put the enameled wire into the top of the two paint stripping wheels, and then easily pull the enameled wire out from the stripping and adding wheels. The paint stripping work is completed, because when the machine is started, the tapered paint stripping wheel rotates at a high speed to remove the enameled wire. The insulating paint or oxide is worn off, the enameled wire after peeling the paint has a bright and clean surface, and the peeling effect of a single enameled wire is remarkable.
When the surface of the paint stripping wheel is uneven or uneven during work, it will cause the wire to be broken and the paint stripping is not clean. At this time, the paint stripping wheel needs to be trimmed. You can use emery cloth to trim and smooth the tapered part of the paint stripping wheel. Until the conical parts of the two paint stripping wheels can touch smoothly. Regularly trim the paint stripping wheel during work, so as to increase the service life of the paint stripping wheel.
The tapered paint peeling wheel can use the collar on the shaft to move the wheel upwards until it is worn down to the bottom of the entire wheel. For easy operation, the inner hole of the wheel is directly installed on the shaft, so when you need to change it When using a new wheel, as long as the unusable wheel is withdrawn from the shaft, and then the new wheel is inserted, the work can be restarted.
Photo showing:
