Name: silk covered wire, stranded wire, high frequency wire, high temperature and high voltage wire, film covered wire
Performance: Our products are stranded with high-purity 0.10 enameled wire, with a temperature resistance of 155/180 degrees, and the insulation between each wire is 1KV, according to customer needs
The maximum temperature resistance can reach 230 degrees, and the withstand voltage can reach more than 4KV. Low high frequency impedance, low self-heating, low resistance, solve high frequency skin effect
answer.
Applicable frequency: 15KHZ-300KHZ.
Application: Mainly used in induction heating, electric heating, induction cooker, high-power switching power supply, wireless charging, electric welding machine, transformer and other electrical appliances.
Note: First of all, the wire end must be completely tinned (penetration of the wire is particularly important), and secondly, the wire must not be scratched or sprained to cause paint during use.
The membrane is damaged and cannot be overloaded in the end. When processing the transformer, pay attention to the 4KV isolation voltage between the primary and secondary stages (USDC, USPI,
Silicone cable), where people can touch the wire reel and electromagnetic heating, USDC recommends using USPI or silicone cable.
Performance: Our products are stranded with high-purity 0.10 enameled wire, with a temperature resistance of 155/180 degrees, and the insulation between each wire is 1KV, according to customer needs
The maximum temperature resistance can reach 230 degrees, and the withstand voltage can reach more than 4KV. Low high frequency impedance, low self-heating, low resistance, solve high frequency skin effect
answer.
Applicable frequency: 15KHZ-300KHZ.
Application: Mainly used in induction heating, electric heating, induction cooker, high-power switching power supply, wireless charging, electric welding machine, transformer and other electrical appliances.
Note: First of all, the wire end must be completely tinned (penetration of the wire is particularly important), and secondly, the wire must not be scratched or sprained to cause paint during use.
The membrane is damaged and cannot be overloaded in the end. When processing the transformer, pay attention to the 4KV isolation voltage between the primary and secondary stages (USDC, USPI,
Silicone cable), where people can touch the wire reel and electromagnetic heating, USDC recommends using USPI or silicone cable.
0.1mm represents the diameter of each one wire
0.1mmx90 shares ,out diameter is 1.33mm,0.71mm2
0.1mmx100 shares ,out diameter is 1.40mm,0.79mm2
0.1mmx110 shares ,out diameter is 1.47mm,0.86mm2
0.1mmx120 shares ,out diameter is 1.53mm,0.94mm2
0.1mmx130 shares ,out diameter is 1.60mm,1.02mm2
0.1mmx140 shares ,out diameter is 1.66mm,1.1mm2
0.1mmx150 shares ,out diameter is 1.71mm,1.18mm2
